Description: The ID TECH SecureKey M130 point-to-point encryption (P2PE) device is designed with a built-in keypad which allows manual entry functionality while still providing the added security of P2PE. Along with this, the device can be used to prompt for additional information, such as CVV and AVS information.
Note: These selections will only configure the device to prompt for these values but will not make them required. Clerks can still bypass the prompts by simply pressing Enter on the device. If the merchant desires a device which requires these prompts, they may wish to look into replacing their reader with a PIN pad device.
To configure the M130, perform the following:
- Press the Admin/# key on the device.
-
The device will then display Select manual config 1-6
-
Enter a value of 1 through 6 depending on the desired functionality:
-
Configuration #1: Card Number, Expiration Date
-
Configuration #2: Card Number, Expiration Date, ZIP Code
-
Configuration #3: Card Number, Expiration Date, Street Number of the Address, ZIP Code
-
Configuration #4: Card Number, Expiration Date, ZIP Code, Security Code
-
Configuration #5: Card Number, Expiration Date, Address, ZIP Code, Security Code
-
Configuration #6: Card Number, Expiration Date, Address, Security Code
-
-
Press Enter on the device; this will set the mode and return the device to data capture mode
-
If an invalid key is selected, the unit will display Error then return to Step 2.
Note: If more than one key is selected, the last key selected will be used to select the mode.